Philips DVP5900-37 - Manual (Page 11)

English
11
Connections
Connecting TV
DIGITAL
COAXIAL
OUT
CVBS
VIDEO OUT
Y Cr/Pr
Cb/Pb
HDMI AUDIO
OUT
AUDIO
IN
V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
AUDIO OUT V (Pr/Cr) U (Pb/Cb) Y
S-VIDEO IN
VIDEO IN
COMPONENT VIDEO IN
2
1
DIGITAL
COAXIAL
OUT
CVBS
VIDEO OUT
Y Cr/Pr
Cb/Pb
HDMI AUDIO
OUT
AUDIO
IN
V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
AUDIO OUT V (Pr/Cr) U (Pb/Cb) Y
S-VIDEO IN
VIDEO IN
COMPONENT VIDEO IN
2 1
IMPORTANT!
–
You only need to make one
video connection from the following
options, depending on the
capabilities of your TV system.
–
Connect the DVD system
directly to the TV.
Using Composite Video jacks
(CVBS)
1
Use the composite video cable (yellow)
to connect the DVD Player’s CVBS
(VIDEO) jack to the video input jack (or
labeled as A/V In, Video In, Composite or
Baseband) on the TV (cable supplied).
2
To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied)
.
IMPORTANT!
–
The progressive scan video
quality is only possible when using Y
Pb Pr and a progressive scan TV is
required.
Using Component Video jacks
(Y Pb Pr)
1
Use the component video cables (red /
blue / green) to connect the DVD system’s
Y Pb Pr jacks to the corresponding
Component video input jacks (or labeled
as Y Pb Pr) on the TV (cable not supplied).
2
To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied)
.
3
Proceed to page 19 for detailed
Progressive Scan set up.
01-41-DVP5900_US3 22/09/05, 2:07 PM 11