Philips DVP5900-37 - Manual (Page 33)

English
33
DVD Setup Menu Options
LPCM Output
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust ‘LPCM Output’.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
Language
Digital Output
LPCM Output
Night Mode
Audio Track Rating Video
96K
48K
PCM
96K
Off
1
In ‘Audio Track’, press OK to enter the
submenu.
2
Press 3 4 to highlight {LPCM Output},
then press OK.
3
Press
3 4 to highlight one of the options
below:
48K
Playback a disc recorded at the sampling
rate of 48kHz.
96K
Playback a disc recorded at the sampling
rate of 96kHz that can only be achieved
in Stereo-Classic mode.
4
Select an item and press OK.
Helpful Hint:
– LPCM Output can be selected only when
PCM is activated.
TIPS: To return to the previous menu, press OK .
To remove the menu, press SYSTEM MENU .
Night Mode - turning on/off
In this mode, the high volume outputs are
softened and low volume outputs are
brought upward to an audible level. It is
useful for watching your favorite action
movie without disturbing others at night.
Language
Digital Output
LPCM Output
Night Mode
Audio Track Rating Video
Off
On
PCM
96K
Off
1
In ‘Audio Track’, press OK to enter the
submenu.
2
Press
3 4 to highlight {Night Mode}, then
press OK.
3
Press
3 4 to highlight one of the options
below:
On
Select this to level out the volume. This
feature is only available for movies with
Dolby Digital mode.
Off
Select this when you want to enjoy the
surround sound with its full dynamic
range.
4
Select an item and press OK.
01-41-DVP5900_US3 22/09/05, 2:09 PM 33