Philips MCM760-37B - Manual (Page 30)

30
English
IMPORTANT!
Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
Preparation
1
Press TAPE/AUX once or more to select
TAPE(or TAPE on the remote control)
2
Load a recordable tape into the tape deck.
3
Press í or ë on the remote control to select
the recording tape side.
➜
A appears on the display for the reverse side
➜
B appears on the display for the forward
side
4
Press TAPE A/B repeatedly on the remote
control to select a recording mode.
➜
å for recording on one side only.
➜
∂ ∂ ∂ ∂ ∂ for recording on both sides.
5
Prepare the source to be recorded.
CD – load the disc
TUNER – tune to the desired radio station
USB – connect a USB device
AUX – connect external equipment
Tape recording
One touch recording
1
Select the recording source: CD, TUNER,
USB or AUX
2
Start playback of the selected source
3
Press TAPE RECORD
➜
REC starts flashing
4
To stop recording, press Çon the set
CD/USB Synchro start recording
1
Select the recording source: CD or USB
2
If necessary, press í or ë once or repeatedly
until the desired track number appears in the
display
● MP3/WMA: Press а / б and í or ë to
select the desired album and track
Or
●
Program your desired tracks (see CD:
Programming tracks)
- Make sure you press
Ç after finishing
programming
2
Press TAPE RECORD
➜ The playback and recording start
automatically
3
For brief interruption, press ÉÅ. To resume
recording, press ÉÅ again
4
To stop recording, press Ç
➜
Recording and playback will stop
simultaneously
TAPE
Helpful hints:
When recording is in progress, it is not possible:
– to change tape side;
– to listen to another source;
– to activate the timer function.
– One Touch Recording is not possible in TAPE
mode, "
SELECT SOURCE" will appear.
001-036_MCM760_37_Eng 2/16/2006, 20:12 30