Philips MCM760-37B - Manual (Page 14)

14
English
Installation
Rear connections
Warning:
– Never make or change connections with
the mains supply switched on.
– Install your set near the AC outlet and
where the AC power plug can be reached
easily.
A Speaker connections
Use the supplied speakers only. Using other
speakers can damage the set or the sound
quality will be negatively affected.
●
Connect the cable of the left speaker to L +/-
(red and black) and the cable of the right
speaker to
R +/- (red and black) as follows:
a. Press the clip of the red terminal and fully
insert the stripped portion of the colored (or
marked) speaker cable into the socket, then
release the clip
b. Press the clip of the black terminal and fully
insert the stripped portion of the black (or
unmarked) speaker cable into the socket, then
release the clip
B Antenna connections
AM antenna
1
Assemble the loop antenna as shown:
001-036_MCM760_37_Eng 2/16/2006, 20:11 14