Philips MCM760-37B - Manual (Page 29)

English
29
TAPE
IMPORTANT!
– Before playing a tape, check and tighten
slack tape with a pencil. Slack tape may get
jammed or may burst in the mechanism.
– C-120 tape is extremely thin and is easily
deformed or damaged. It is not
recommended for use in this system.
– Store the tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer, TV or
speaker).
Playing a tape
1
Press TAPE/AUX once or more to select
TAPE(or TAPE on the remote control)
2
Press OPEN / CLOSE 0 to open the tape deck
door
3
Insert a recorded tape and close the tape deck
door.
➜ Load the tape with the open side downward
and full spool to the left
4
Press ÉÅ to start playback
➜
At the end of one side, the tape playback will
be automatically reversed and star t from the
beginning of the other side
➜
A (BACK) or B (FRONT) appears
To rewind or fast forward
1
Press à or á on the remote control
2
Press Ç when you reached the desired passage
➜
The tape will stop automatically at the end of
rewinding or fast forwarding.
To stop playback
●
Press Ç
Helpful hints:
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (CD or
TUNER, for example).
Recording to a tape
General information on recording
● For recording, use only tape of IEC type I
(normal tape).
● The recording level is set automatically,
regardless of the position of the Volume,
Incredible Surround, BASS/TREBLE and so forth.
● The tape is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for six to seven
seconds.
●
To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
To change the playback mode
● Press TAPE A/B on the remote control
repeatedly to select the different playback
modes
å : plays one side of the tape
∂ : plays both sides once
∫ : plays both sides repeatedly (up
to 10 times)
To change the playback side
● On the remote control, press í or ë
➜
A (BACK) or B (FRONT) appears on the
display, depending on the tape side selected
●
If “CHECK TAPE” is displayed, the protection tab
has been broken. Put a piece of clear adhesive
tape over the opening.
OPEN CLOSE
ALBUM STOP / DEMO
001-036_MCM760_37_Eng 2/16/2006, 20:12 29