Philips MCM760-37B - Manual (Page 22)

22
English
CD
Programming tracks
You may store up to 99 tracks in the desired
sequence. If you like, store any track more than
once.
1
In the stop position, press PROGRAM to star t
programming
➜
PROG flashes
➜
Audio CD: Display shows current
track number
MP3/WMA: Display shows current album/
track number
2
Press í or ë once or repeatedly until the
desired track number appears in the display
●
MP3/WMA: Press а / б and н / л to
select the desired album and track
3
Press PROGRAM to confirm
➜ Audio CD: Display shows briefly the
number and playing time of tracks programmed;
Then, the display shows
PROG and the track
number you just stored
➜ MP3/WMA: Display shows briefly the
number of tracks programmed;
Then, the display shows the album/ track number
you just stored
Helpful hints:
– The set will return to the stop position if no
button is pressed within 20 seconds.
PROG stops flashing. To resume programming, press
PROGRAM.
– MP3/WMA: When playing a program, use of
à or á are void.
Erasing the program
You can erase the contents of the memory by:
●
Press
9
– once if in the stop position (after you stop
programming);
– twice during playback;
●
Press STANDBY-ON/ECO POWER y
● Select another sound source
● Open the CD door
➜
PROG disappears.
PROGRAM CLEARED
scrolls
4
Repeat steps 2-3 to select and store all desired
tracks.
➜ PROGRAM FULL is displayed if you attempt
to program more than 99 tracks
5
Press Ç to stop programming
➜
PROG stops flashing
➜
Audio CD: Display shows the number and
playing time of tracks programmed
➜
MP3/WMA: Display shows the album/ track
number you just stored
6
Press ÉÅ play the program
CD TUNER
REPEAT PROGRAM
TAPE A /B DISPLAY/CLOCK
SHUFFLE
TAPE AUX
STANDBY
DISC
CD
PROG
DISC
MP3
CD
PROG
DISC
CD
PROG
DISC
CD
PROG
001-036_MCM760_37_Eng 2/16/2006, 20:11 22