Philips Car infotainment system CID3610 6.5" touch screen navigation Bluetooth - Manual (Page 20)

21
3
Tap or to select an EQ.
4
Tap or to adjust below settings:
• [Bass] bass range: -14 to +14
• [Mid] middle range: -14 to +14.
• [Treb] treble range: -14 to +14
• [LPH] low pass filter range: 60, 80,
100, 200.
• [MPF] middle pass filter range: 500,
1K, 1.5K, 2.5K.
• [HPF] high pass filter range:10K,
12.5K, 15K, 17.5K.
5
Tap to restore the above settings into
default settings.
6
Tap to exit.
Adjust fader/balance
You can also adjust the front and rear speaker
balance, the left and right speaker balance, and
subwoofer settings.
1
Tap anywhere except for the upper left
corner to display menu on the screen, if
necessary.
2
Tap .
3
Tap
Below options are displayed:
»
4
Tap or to select subwoofer volume.
• [Sub] subwoofer volume: 0 to 24.
8 Adjust sound
Adjust volume
1
Turn /MUTE/VOL+ clockwise to
increase volume.
Turn
• /MUTE/VOL+ anti-clockwise to
reduce volume.
Mute
1
During play, press /MUTE/VOL+.
To turn the sound back on, press •
/MUTE/VOL+ again.
Tip
You can also turn off sound by tapping • on
the screen.
Select preset equalizer
You can select preset equalizer:
•
[User]
• [Techno]
• [Rock]
• [Classic]
• [Jazz]
• [Optimal]
• [Flat]
• [Pop]
1
Tap anywhere except for the upper left
corner to display menu on the screen, if
necessary.
2
Tap .
The current Equalizer setting is
»
displayed.
EN
English