Philips Car infotainment system CID3610 6.5" touch screen navigation Bluetooth - Manual (Page 18)

19
• [Missed calls]
• [Received calls]
• [Dialed calls]
• [Phone book]
• [Sim phone book]
• [Local phone book]
Or tap to dial number directly, then tap
to dial.
Receive call
By default, all incoming calls are received
automatically.
1
If there is incoming call, [Incoming call...]
flashes on the screen. Speak into the
Bluetooth microphone.
2
When conversation ends, tap (red)
to terminate the call.
Tip
You can select to receive calls manually by set •
[Auto answer] to [Off] status.
Switch phone call to the mobile
If you do not want your passenger to hear
your incoming call, you can switch the call to
the mobile.
1
During talking, tap .
Disconnect Bluetooth devices
1
To disconnect one device, tap (red).
»
(green) is displayed.
Tip
The device will also be disconnected when the •
device is moved beyond the operational range.
If you want to reconnect the device to the
•
unit, place it within the operational range.
If you do not want to reconnect the device to
•
the unit automatically, tap >[Auto connect],
then select [Off]. For details, see the “Adjust
Bluetooth settings” section.
Make a call
1
Pair the phone with the unit.
2
Tap to display the home menu.
3
Tap [Bluetooth].
The Bluetooth menu is displayed.
»
4
Tap or to select the paired phone,
then tap .
5
Tap or to search for phone number
from the following list:
EN
English