Philips DVDR615-17B - Manual (Page 76)

64
Timer
VCR Plus+ system
PlusCode number
- - - - - - - - -
Mo-Fr/Weekly
Press SELECT To store
Press OK
Selecting daily/weekly recordings
Using SELECT , select from the following options:
'
Mo-Fr': Repeated daily recordings from Monday to Friday.
' Weekly': Repeated weekly recordings (every week on the same day). Tip
5 Confirm with OK .
aThe following message appears on the screen: 'Please enter
channel number'
b The channel number of the TV channel has not yet been assigned to
the PlusCode number. Using C , D or the number buttons 0..9 on
the remote control, select the corresponding channel number (name)
of the TV channel and confirm with OK .
aThe following message appears on the screen: 'PlusCode
number wrong'
b The entered PlusCode number is incorrect. Repeat your entry or
cancel using the SYSTEM-MENU button.
b Check the time/date (see 'Setting the time & date' in 'Installing your
DVD recorder').
aThe following message appears on the screen: 'Date does not
match Mon-Fri'
b A daily recording was entered for the wrong day. Daily programming
can only be used for recordings to be made from Monday to Friday.
Problem
Timer
VCR Plus+ system
Date
01/22 Ch.
001 Start
08:30AM End
10:30AM
Rec
Mode
M1
To store
Press OK
AM/PM
Press SELECT
6 The decoded data appears after confirmation. You can go back
and change the data. Select the appropriate input field with
C or
D . Change the information with CH+ A , CH- B or the
number buttons 0..9 .
Change ' AM/PM'
Use the SELECT button to select 'AM' or 'PM' in the input fields
'Start' and 'End'.
Changing the recording mode
Select 'RecMode' using C .
Using CH- B , select the recording mode 'M1, M2, M2x, M3, M4, M6',
M8'.
Tip
7 If all information is correct, press the OK button. The
information is stored in a TIMER block.
Programming a recording (TIMER)