Philips BTM630-37B - Manual (Page 29)

English
29
Cleaning the Cabinet
●
Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
● When a disc becomes dirty,
clean it with a cleaning cloth.
Wipe the disc from the centre
out.
●
Do not use solvents such as
benzene, thinner, commercially
available cleaners, or antistatic spray intended for
analogue records.
Cleaning the disc lens
● After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.
Maintenance
Specifications
AMPLIFIER
Output power ....................................... 2 x 15 W RMS
Signal-to-noise ratio .......................................
≥ 70 dBA
Frequency response ...... 20 Hz – 20 KHz, ± 3 dB
Input sensitivity AUX ....................... 0.5 V (max. 2 V)
Impedance loudspeakers ......................................... 4
Ω
Impedance headphones ........................................ 32 Ω
Output power headphones ....................... <50 mW
CD PLAYER
Frequency range ................................ 20 Hz – 20 kHz
Signal-to-noise ratio ............................................ 70 dBA
TUNER
FM wave range ................................... 87.5 – 108 MHz
AM wave range ................................. 530 – 1700 KHz
Antenna
FM ....................................................................... 75 Ω wire
AM .............................................................. Loop antenna
USB PLAYER/SD/MMC CARD
USB ................................................................... 12Mb/s, V1.1
......................................... support MP3 and WMA files
Number of albums/folders ................. maximum 99
Number of tracks/titles ...................... maximum 400
Bluetooth
Communication system .......... Bluetooth Standard
version 2.0
Output ............ Bluetooth Standard Power Class 2
Maximum communication range ...... Line of sight
approx. 10m
1)
Frequency band .... 2.4 GHz band (2.4000 GHz -
2.4835 GHz)
Modulation method ................................................. FHSS
Compatible Bluetooth profiles
2)
.............................................................
...... A2DP (Advanced Audio Distribution Profile)
.. AVRCP (Audio Video Remote Control Profile)
Supported codecs
Receive .................... SBC (Sub Band Codec), MP3
Transmit .............................. SBC (Sub Band Codec)
1) The actual range will vary depending on factors such as
obstacles between devices, magnetic fields around a microwave
oven, static electricity, reception sensitivity, antenna’s performance,
operating system, software application, etc.
2) Bluetooth standard profiles indicate the purpose of Bluetooth
communication between devices.
*Wireless range: 10m/30ft line of sight, range may vary
depending on actual conditions. Bluetooth
R device with A2DP
(Advanced Audio Distribution Profile) enabled.
GENERAL INFORMATION
AC Power ............................. 100 – 240 V / 50-60 Hz
Dimensions (w x h x d) . 206 x 141 x 390 (mm)
Weight .....................................................................
2.374 kg
Standby power consumption ............................ <7 W
Eco power standby ................................................. <1 W
Specifications and external appearance are
subject to change without notice.
pg001-032_BTM630_37-Eng 2007.6.18, 11:43 29