Philips BTM630-37B - Manual (Page 23)

English
23
iPod Dock
Compatible iPod players
●
Most Apple iPod models with 30-pin dock
connectors as follows: 20GB, 40GB, 20/30GB
Photo, 40/60GB Photo, 30GB Video, 60GB Video,
80GB Video, Mini, Nano and Nano 2nd
generation.
Selecting the correct dock
adaptor
● 8 iPod dock adaptors of different type, as
indicated at the back of the adaptor, are included
to fit the following iPod:
20GB, 40GB, 20/30GB Photo, 40/60GB Photo,
30GB Video, 60GB Video, 80GB Video, Mini,
Nano
and Nano 2nd generation.
Setup
●
Insert a dock adapter corresponding to the
portable player you use.
2
1 1
● To connect with a different iPod portable player,
pop up the corresponding dock adapter and
replace with a new one of the matching type.
Playing an iPod portable player
1
Correctly dock your iPod por table player in the
cradle. Make sure the dock adaptor is
compatible.
● Make sure that you have powered on your iPod
player before selecting DOCK source.
➜ On the display, "iPod" is displayed if iPod is
connected.
2
Press SOURCE on the system repeatedly or
iPod
on the remote control to select iPod
source.
3
Playback starts automatically. You can select
available features (such as play/pause, skip track,
fast forward/backward, menu selection) during
playback.
Charging iPod battery using the
dock
● In DOCK mode, directly dock your iPod
portable player on the cradle for charging.
Note:
– For the purpose of SAVING POWER, recharging
of your iPod or USB device is NOT SUPPORTED
when the main set is in the ECO POWER
STANDBY MODE.
pg001-032_BTM630_37-Eng 2007.6.18, 11:43 23