Philips BTM630-37B - Manual (Page 18)

18
English
CD/MP3-CD/WMA Operation
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback. The REPEAT
modes can also be combined with PROGRAM.
1
To select your play mode, press MODE on the
system (SHUFFLE or REPEAT on the
remote control) before or during playback until
the display shows the desired function.
➜ appears if the shuffle playback is
activated and disappears if deactivated.
➜
If appears, it indicates to play the
current track repeatedly.
➜
If ALL is displayed, it indicates to play
all tracks in the whole disc repeatedly.
➜ For an MP3 CD/WMA, if both and ALB
appear on the display panel, it indicates to play
the current album repeatedly.
2
Press ÉÅ to start playback if in the STOP
position.
➜ If you have selected SHUFFLE, playback starts
automatically.
3
To return to normal playback, press the MODE
on the system (SHUFFLE or REPEAT on the
remote control) until
or
is no longer
displayed.
●
You can also press
9 to stop playback and
cancel your play mode.
Note:
– The Repeat and Shuffle functions cannot be
activated simultaneously.
Programming track numbers
Program in the STOP position to select and
store your disc tracks in the desired sequence. If
you like, store any track more than once. Up to
40 tracks can be stored in the memory.
1
Press PROG on the system (or PROG/
CLOCK
on the remote control) to enter the
programming mode.
➜
A track number flashes.
2
Press S / T on the system (or
¡ / ™ on the
remote control) to select your desired track
number.
● For an MP3 CD, Press ALBUM • PRESET +/-
on the system (or
¡ / ™ on the remote
control) to select a desired album number.
3
Press PROG on the system (or PROG/
CLOCK
on the remote control) to confirm the
track number to be stored.
➜ PR X displays, in which X denotes the next
program number to be stored.
4
Repeat steps 2-3 to select and store all desired
tracks.
➜ PROGRAM FULL appears if you attempt to
program more than 40 tracks.
5
Press 9 to finish programming.
➜ PROG displays on the screen.
6
To start playback of your disc program, press
ÉÅ directly.
Erasing the program
You can erase the program by:
●
pressing
9 once in the STOP mode;
● pressing 9 twice during playback;
➜ PROG disappears.
● ejecting the current disc;
pg001-032_BTM630_37-Eng 2007.6.18, 11:43 18