Philips BTM630-37B - Manual (Page 16)

16
English
Basic playback controls
To play a disc
●
Press ÉÅ to start playback.
➜ The current track number and elapsed
playing time of the track are displayed during
disc playback.
To select a different track
● Press S / T on the system (or ¡ / ™ on
the remote control) once or repeatedly until
the desired track number appears in the display.
● You can also use the Numerical Keypad
(0~9)
on the remote control to select a track
directly.
● If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to press
ÉÅ to start playback.
Information display during playback
In CD mode
●
Press DISPLAY repeatedly to see the
following information.
➜
Track number and elapsed playback time of
current track.
➜
Track number and total elapsed playback
time.
➜ Track number and remaining playback time
of current track.
➜ Track number and total remaining playback
time.
In MP3/WMA/USB/CARD mode
● Press DISPLAY repeatedly to see the
following information:
➜
Track number and elapsed playback time of
current track
➜
Title name
➜
Album name
➜
ID3 (if available)
Loading a disc
This CD player plays Audio Discs including CD
Recordables, CD-Rewritables, MP3 CD and
WMA disc.
● CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1
Press SOURCE on the top of the system to
select CD or press CD on the remote.
2
Insert a disc into the disc loader..
➜
Make sure the label side is facing up.
➜
Make sure you have removed any other disc
from the slot loader.
3
Press ÉÅ to start playback.
4
At any time, simply press
9 to stop playback.
CD/MP3-CD/WMA Operation
pg001-032_BTM630_37-Eng 2007.6.18, 11:43 16