System menu options, Basic operations 1, System setup – Philips MCD515-37 User Manual
Page 30
30
English
System Menu Options
Basic operations
1
Press
SYSTEM MENU to enter the Setup
Menu.
2
Press
22/33 to select a page to be set.
3
Press
5/4 to highlight an option.
4
Enter its submenu by pressing
33 or OK.
5
Move the cursor by pressing
5/4 to highlight
the selected item.
➜
In cases of value setting, press
5/4 to adjust
values.
6
Press
OK to confirm.
To return to the upper-level menu
●
Press
22.
To exit from the menu
●
Press
SYSTEM MENU again.
➜
The settings will be stored in the player’s
memory even if the player is switched off.
Note:
– Some of the features in the System Menu
Options are described in “Preparations”.
SYSTEM SETUP
The options included in SYSTEM SETUP page
are: “TV SYSTEM”, “SCREEN SAVER”, “TV TYPE”,
“PASSWORD”, “RATING”, “DEFAULT”and
“DIVX(R) VOD”.
DIVX(R) VOD
DIVX(R) VOD
TV SYSTEM
See "Preparations-Step 3: Setting video
preference" for details.
SCREEN SAVER
This function is used to turn the screen saver on
or off.
➜
ON: In STOP, PAUSE or No DISC mode, if
no actions are performed about 5 minutes, the
screen saver will be activated.
➜
OFF: Screen saver is disabled.
TV TYPE
See "Preparations-Step 3: Setting video
preference" for details.
PASSWORD
You can enter your four-digit password to
activate or deactivate rating control.
➜
"
" is displayed if rating control is activated.
➜
"
" is displayed if rating control is
deactivated.
To change password
1
Move to "PASSWORD" and press
33 or OK
to enter its submenu.
2
If "
" is displayed, enter the default password
(0000) and press
OK to unlock.
●
If "
" is displayed, directly proceed with Step 3
and 4.
3
Enter your new four-digit password using
Numeric Keypad (0-9) on the remote.
4
Press
OK to confirm and the new password
takes effect.
Note:
– The default password (0000) is always active
even if the password has been changed.
pg001-pg042_MCD515-37-Eng
2006.2.27, 16:21
30