Philips MCD515-37 - Manual (Page 20)

20
English
Controls
6 DISC MENU (disc mode only)
– DVD/VCD: enters or exits the disc contents
menu.
– VCD2.0: switches the playback control mode on
or off .
7 22/33
Tuner
– press to tune to a lower/higher radio frequency
gradually.
– press and hold, then release the key to start
automatic search for a radio frequency
downward/upward.
Disc
– (not for MP3 CD) searches backward/forward in
a disc at different speeds.
– In DISC mode, to select a movement direction in
the disc menu or system menu bar.
8 3/4
– In DISC mode, to select a movement direction in
the disc menu or system menu bar.
9 OK
– to exit or confirm the selection.
0 н/л
– Disc: skips to the previous/next chapter/title/
track.
– Tuner: selects a preset radio station.
! STOP 9
– In DISC mode, to stop playback or clear a
program.
@ PLAY/PAUSE 2;
– In DISC mode, to star t or interrupt playback.
# VOL +/-
– adjusts the volume upward/downward.
– adjusts the hours and minutes in clock/timer
setting mode.
– switches the set timer ON or OFF.
$ ANGLE
– selects a DVD camera angle.
% SUBTITLE
– selects a subtitle language.
^ SLEEP
– to set the sleep (auto-off) timer function.
& IS
– to create a super-enhanced stereo effect.
* DSC
– selects different types of preset sound equalizer
settings (FLAT, CLASSIC, JAZZ, POP or ROCK).
( DBB
– enables or disables bass enhancement.
) MUTE
– to interrupt or resume sound reproduction.
¡ DISPLAY (OSD)
– displays information on TV screen during
playback.
™ ECHO (unavailable for this version)
£ MODE
– to select various repeat modes or the shuffle
play mode for a disc.
≤ A-B
– for VCD/CD: to repeat a specific section within
the same track.
– for DVD: to repeat a specific section in a disc.
∞ AUDIO
for VCD
– sets Stereo, Mono-Left or Mono-Right sound
mode.
for DVD
– selects an audio language.
§ TIMER
*– to set the timer.
≥ ZOOM
– DVD/VCD/Picture CD: enlarges or reduces a
picture or active image on the TV screen.
• KEY (unavailable for this version)
ª GOTO
– In DISC mode, to fast search in a disc by
entering a time, title, chapter or track.
Notes for remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (DISC or
TUNER, for example).
– Then select the desired function ( 2;,
н,
л for example).
* = Press and hold the button for more than three seconds.
pg001-pg042_MCD515-37-Eng 2006.2.27, 16:21 20