Philips DVDR3455H-37 - Manual (Page 36)

English
36
D
Press SOURCE repeatedly to select the
correct input channel that matches the
connected jack of the device.
{ CAM 1 }
Input source from the device connected
to the CAM1(VIDEO) and AUDIO L/R
jacks on the front panel.
{ CAM 2 }
Input source from the device connected
to the CAM2 (S-VIDEO) and AUDIO L/R
jacks on the front panel.
{ EXT 1 }
Input source from the device connected
to the VIDEO (CVBS) EXT1 and AUDIO
L/R jacks on the back panel.
{ EXT 2 }
Input source from the device connected
to the S-VIDEO (Y/C) EXT2 and AUDIO
L/R jacks on the back panel.
E
Press REC â to start recording.
You can also press REC â repeatedly
to increase the recording time in
30-minute increments.
F
Start playback on the connected device.
To pause the playback on the device,
press
u . To continue, press u again.
You can use this function to avoid any
unwanted recording .
G
To stop the recording before the
scheduled ending, press STOP Ç .
To record directly to a DVD
recordable disc, see the chapter
“Record on DVD Recordable Disc.”
Record on Hard Disk
(continued)
TIPS: Set the appropriate mode of record quality for HDD recording, the same record quality will be transferred
from HDD to a recordable DVD, see “Before Recording.”
1_dvdr3455H_eng_21832.indd 36 1_dvdr3455H_eng_21832.indd 36 2007-06-11 11:23:26 AM 2007-06-11 11:23:26 AM