Philips DVDR3455H-37 - Manual (Page 18)

English
18
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
TV has only an antenna
input jack
Use this connection if your TV has only a
single Antenna In jack (or labeled as
75 ohm or RF IN) and does not have any
audio/video jacks.
For this connection, you need a RF
modulator in order to view the disc
playback.
A
You may have an Antenna/Cable TV
signal (or from the Cable Box/Satellite
Receiver/VCR) connected to your TV’s
antenna input jack (VHF/UHF RF IN.)
Remove it from the TV and connect it to
the ANTENNA-IN
jack on the
recorder.
B
Use the supplied RF coaxial cable to
connect the TV-OUT jack on the
recorder to the antenna input jack on the
RF modulator.
C
Use an RF coaxial cable (not supplied) to
connect the TO TV jack on the RF
modulator to the antenna input jack on
your TV.
D
Use the supplied AV cables (yellow ends)
to connect the VIDEO (CVBS) -
OUT1 jack on the recorder to the video
input jack (or labeled as A/V In, Video In,
Composite or Baseband) on the RF
modulator.
E
Use the supplied AV cables (red/white
ends) to connect the AUDIO L/R -
OUTPUT jacks on the recorder to the
audio input jack (or labeled as AUDIO IN
or LINE IN) on the RF modulator.
Helpful Hints:
– If you have connected the TO TV jack on
your RF modulator to your TV, set your TV to
channel 3 or 4.
– See your electronics retailer for details on
RF modulator availability and operations.
Step 2 : Optional Connections
R
L
Y
PB
PR VIDEO (CVBS) COMPONENT
VIDEO
EXT 2
S-VIDEO (Y/C)
VIDEO (CVBS)
S-VIDEO (Y/C) AUDIO
COAXIAL
R
L
R
L
OUT 3 (DIGITAL AUDIO)
INPUT OUTPUT
OUT 2
OUT 1
EXT 1 DVD RECORDER 22F8
Complies with 21 CFR
1040.10 and 1040.11
R
LISTED
AUDIO
ANTENNA-IN TV-OUT
CABLE SATELLITE ANTENNA
AUDIO IN
R L VIDEO
IN
TO TV
ANT IN
CH3 CH4
TV
A
B
C
D E
Back of an RF
Modulator
(Example only)
1_dvdr3455H_eng_21832.indd 18 1_dvdr3455H_eng_21832.indd 18 2007-06-11 11:23:24 AM 2007-06-11 11:23:24 AM