Philips DVDR3455H-37 - Manual (Page 17)

English
17
Connecting the audio cables
This connection enables you to listen to
the sound.
Option 1: Using an audio cable
You can connect the recorder to a two
channel stereo system or receiver in
order to enjoy the stereo sound system.
Use the supplied audio cable (red/white
plugs) to connect the AUDIO
OUTPUT jacks to these devices with
the same input jacks.
Step 1: Basic Recorder Connections
(continued)
R
L
Y
P B
P R VIDEO (CVBS) COMPONENT
VIDEO
EXT 2
S-VIDEO (Y/C)
VIDEO (CVBS)
S-VIDEO (Y/C) AUDIO
COAXIAL
R
L
R
L
OUT 3 (DIGITAL AUDIO)
INPUT OUTPUT
OUT 2
OUT 1
EXT 1
AUDIO
ANTENNA-IN TV-OUT
AU D IO O U T S-V ID E O IN
V ID E O IN
TV
DIGITAL IN
OR
AV amplifi er/
receiver
Option 1
Option 2
Option 2: Using a coaxial cable
You can connect the recorder to an AV
amplifi er/receiver in order to enjoy
multichannel surround sound.
Use a coaxial cable (not supplied) to
connect the COAXIAL (DIGITAL
AUDIO) jack to the digital input on the
AV amplifi er/receiver (with a digital
multichannel sound decoder).
Before you start operating, set the audio
settings accordingly (see “Setup Menu
Options – AUDIO settings.)
If the AUDIO settings do not match your
amplifi er’s capabilities, the amplifi er may
produce a strong, distorted sound or no
sound at all.
Helpful Hint:
– Do not connect your TV’s audio output
jacks to the AUDIO L/R (IN-EXT) jacks on
this recorder, this may cause unwanted
noise.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
1_dvdr3455H_eng_21832.indd 17 1_dvdr3455H_eng_21832.indd 17 2007-06-11 11:23:24 AM 2007-06-11 11:23:24 AM