Philips SE8881B-22 - Manual (Page 52)

52
Delete all old incoming messages
From the base
Press and hold in standby mode.
» All old messages are permanently
deleted.
From the handset
1
Select [Menu] > > [Delete all], then
press [OK] to confirm.
» The handset displays a confirmation
request.
2
Press [OK] to confirm.
» All old messages are permanently
deleted.
Note
• You can only delete the read messages. No deleted
messages can be recovered.
Call screening
You can hear the caller while he is leaving a
message. Press to answer the call.
From the base
Press / to adjust the speaker volume
during call screening. The lowest volume level
turns off the call screening.
Set the sound quality of the message
You can adjust the sound quality of the
messages received from the answering machine.
1
Select [Menu] > > [Msg quality], then
press [OK] to confirm.
2
Select the new setting, then press [OK] to
confirm.
» The setting is saved.
From the base
• To start/stop listening, press .
• To adjust the volume, press / .
• To play the previous message, press
[Option] > [Previous].
• To replay the current message, press
[Option] > [Repeat].
• To play the next message, press [Option]
> [Forward].
• To delete the current message, press .
Note
• No deleted messages can be recovered.
From the handset
Select [Menu] > > [Play], then press [OK]
to confirm.
» New messages start playing. Old
messages start playing if there is no
new message.
• Press [Back] to stop listening.
• Press [Option] to enter the options menu.
• Press / to increase/decrease the
volume.
Delete an incoming message
From the base
Press when you listen to the message.
» The current message is deleted.
From the handset
1
When you listen to the message, press
[Option] to enter the options menu.
2
Select [Delete], then press [OK] to
confirm.
» The current message is deleted.
EN