Philips SE8881B-22 - Manual (Page 45)

45
Auto registration
Place the unregistered handset on the base
station.
» The handset detects the base station
and registers automatically.
» Registration is completed in less than 2
minutes. The base station automatically
assigns a number to the handset.
Manual registration
If auto registration fails, register your handset
manually to the base station.
1
Access the “Services” menu on the handset
(see “Access the services menu” in the
previous paragraph in this chapter).
2
Select [Register], then press [OK] to
confirm.
3
Press and hold on the base station for
5 seconds until you hear a confirmation
beep.
4
Enter the system PIN. Press [Clear] to
make corrections.
5
Press [OK] to confirm the PIN.
» Registration is completed in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
•
If the PIN is incorrect or no base is found within a
certain period, your handset displays a notification
message. Repeat the above procedure if registration
fails.
Note
•
The preset PIN is 0000. No change can be made on it.
3
Select [On]/[Off], press [OK] to confirm.
» The setting is saved.
Note
•
To reset the first ring status, go to the reset menu.
Auto clock
Note
• This service is network-dependent.
Note
• Make sure that you have the caller ID service before
you have this feature.
It synchronizes the date and time on your
phone with the public switched telephone
network (PSTN) automatically. To synchronize
the date, make sure that the current year is set.
1
Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2
Select [Auto clock], then press [OK] to
confirm.
3
Select [On]/[Off], then press [OK] to
confirm.
» The setting is saved.
Register the handsets
You can register additional handsets to the base
station. The base station can register up to 5
handsets.
EN