Philips SE8881B-22 - Manual (Page 25)

25
2
Select or enter a handset number, then
press [OK] to confirm.
» The selected handset rings.
3
Press on the selected handset or
INTERCOM on the base station.
» The intercom is established.
4
Press [Conf] .
» You are now in a 3-way conference
call with an external call and a selected
handset/base station.
5
Press on the handset or /HOME
on the base station to end the conference
call.
Note
• If [Services] > [Conference] is set to [Auto], press
[Conf] to join an ongoing conference with another
handset.
During the conference call
You can press and hold * on the handset or
press INTERCOM on the base station to:
• put the external call on hold and go back
to the internal call.
» The external call is put on hold.
• toggle between the external and internal
call.
• establish the conference call again.
Note
• If a handset/the base station hangs up during the
conference call, the other handset/base station remains
connected to the external call.
EN