BT 3010 Classic - Manual (Page 41)

Diverse 3010 ~ 4th Edition ~ 28th February ~ 3722
37
This will NOT reset:
– The handset PIN.
– Registration to the base station.
This will reset:
– Handset earpiece volume to 1.
– Auto talk to ON.
– Button beeps to ON.
– Battery warning beep to ON.
– Confirmation beep to ON.
– Base station on-screen
display to OFF.
– Handset ringer volume to 5.
– Handset ringer tone 1.
– Ring priority OFF.
It will delete:
– Numbers stored in the speed dial
memory.
– Numbers in the redial memory.
To reset the handset to its
original settings
Press the SET button.
Press the 1 then the 8 buttons.
Press the OK ( ) button.
Enter the handset PIN
(original setting
0000 ).
Press the OK ( ) button.
Press the 0 button.
Press the OK ( ) button to
confirm.
Press the RED PHONE button
to return to standby.
1
8
TUV
KEYPAD
0
Call allocation
If you have registered additional
handsets with your Diverse 3010 Classic
base station you can specify the way you
wish the phones to ring.
Group ringing
Your Diverse 3010 Classic will ring all
handsets registered to its base whenever
there is an incoming call. This is called
group ringing.
Ring priority
Your Diverse 3010 Classic can be set so
that an incoming call will ring first at a
preferred handset. If there is no answer,
the call will revert to all other handsets.
This is called ring priority. Your Diverse
3010 Classic is preset for group ringing.
ADDITIONAL
FEA
TURES
Diverse 3010 User Guide 22/3/01 1:34 pm Page 37