BT 3010 Classic - Manual (Page 37)

Diverse 3010 ~ 4th Edition ~ 28th February ~ 3722
33
To adjust the melody of the
base ringer
There are 10 melodies.
Press the SET button.
Press the 0 button.
Press the 6 button.
Press the OK ( ) button.
You hear the current melody
and the display shows the
current setting.
Press a button 0-9 until you
hear the melody you want.
Press the OK ( ) button to
confirm.
Press the RED PHONE button
to return to standby.
Press 1 for normal volume.
Press 2 for louder.
Press 3 for loudest.
Press the OK ( ) button.
Press the RED PHONE button
to return to standby (do not
press this button during a call).
2
ABC
3
DEF
To adjust the ringer volume
in the base station
You can choose the
‘crescendo’ ring that gradually
increases in volume, plus 5
additional levels: 1 = lowest;
5 = loudest; and 0 is off.
Press the SET button.
Press the 0 button.
Press the 5 button.
Press the OK ( ) button.
The ringer sounds and the
current setting is displayed.
Use the keypad to enter the
setting you want:
Volume =1-5 (1 is the lowest).
Crescendo = 6.
Off = 0.
Press the OK ( ) button to
confirm.
Press the RED PHONE button
to return to standby.
0
5
JKL
KEYPAD
1-5
6
MNO
0
0
6
MNO
0-9
To switch the confirmation
tones on and off
Whenever you confirm a new
setting, your handset gives a
long confirmation beep. You
can switch these beeps on and
off.
Press the SET button.
Press the 1 button then the
3 button.
Press the OK ( ) button.
Press 0 to switch the tones off.
1
3
DEF
0
ADDITIONAL
FEA
TURES
1
Diverse 3010 User Guide 22/3/01 1:34 pm Page 33