BT 3010 Classic - Manual (Page 20)

Diverse 3010 ~ 4th Edition ~ 28th February ~ 3722
16
Making and transferring
calls between handsets
If you have multiple handsets
registered with the base, the Diverse
3010 Classic enables two handsets to
talk to each other on an internal
‘intercom’ call, while a third handset
can be on an external call.
To page a handset from the
base station
To locate handsets that are
away from the base station.
Press the PAGE button on
the base.
All handsets registered with
the base will ring for 30
seconds.
To stop paging press the
PAGE button again.
Or
Press the GREEN PHONE
button on the handset.
If you have additional handsets,
you can make internal intercom
calls between the handsets.
Secrecy
You can switch off the handset
microphone so that your caller
cannot hear you while you talk
to someone else in the room.
When ready, you can switch
the microphone back on.
During a call:
Press the INT button to switch
the microphone off. Your
caller will hear a melody.
Display shows
EXT (flashing)
and INT .
Press the RECALL button to
speak to your caller again.
INT
R
To make an internal intercom
call to another handset
Press the INT button. Display
shows your handset number.
Enter the number of the
handset you want to call e.g. 2.
The handset will ring.
To end the call, press the RED
PHONE button, or replace the
handset on the base.
INT
2
ABC
Note
You may turn the music on hold off.
Please see page 34.
USING
Diverse 3010 User Guide 22/3/01 1:33 pm Page 16