BT 3010 Classic - Manual (Page 35)

Diverse 3010 ~ 4th Edition ~ 28th February ~ 3722
Directory for barred/enabled
numbers
To: Bar numbers.
Enable handsets to call
only specified numbers.
Create a memory list.
Press the SET button.
Press the 0 then the 1 buttons.
Press the OK ( ) button.
Enter the base station PIN
(original setting
0000 ).
Press the OK ( ) button.
Display shows the first location.
Press the MEMORY button
if necessary to scroll to the
location you want 1-5.
Press the OK ( ) button.
Enter the number you want to
bar, enable or change. Press
the
button to delete digits.
Press the OK ( ) button to
confirm.
Press the RED PHONE button
to return to standby.
To switch call barring/call
enabling on and off
Once you have set the numbers
you want, you can then switch
call barring/enabling on or off
at any time (see below). You
can do this from any handset
registered to the base station.
Press the SET button.
Press the 0 button twice.
Press the OK ( ) button.
Enter the base station PIN
(original setting
0000 ).
Press the OK ( ) button.
Press 1 to bar the numbers
you have stored.
3 to enable handsets to
dial only the numbers
stored
0 to switch call barring/
call enabling off.
Press the OK ( ) button to
confirm.
Press the RED PHONE button
to return to standby.
31
01 1
Blank.
Memory
location (1-5).
Function
number entered
previously.
Note
The barred or enabled numbers must
be switched on before you can use.
See below.
0
KEYPAD
1
3
DEF
0
SECURITY
0
1
KEYPAD
KEYPAD
Diverse 3010 User Guide 22/3/01 1:33 pm Page 31