Philips DVD765SA - Manual (Page 11)

Hookups (cont’d) 11
Connecting to a TV Only
TV has Component Video In Jacks
COAXIAL OPTICAL
DIGITAL AUDIO OUT
PCM-MPEG2-
Dolby Digital-DTS
CVBS
VIDEO OUT
AUDIO
OUT
S-VIDEO Y Pb/Cb Pr/Cr
L
R
1
2
Back of TV
(example only) 2
LEFT AUDIO IN
RIGHT AUDIO IN
Pr/Cr
Y
Pb/Cb
LEFT AUDIO IN LEFT AUDIO IN
RIGHT AUDIO IN RIGHT AUDIO IN
Pr/Cr Pr/Cr
Y
Pb/Cb Pb/Cb
1
RIGHT
FRONT
MULTICHANNEL AUDIO OUT
LEFT
FRONT
LEFT
SURROUND
RIGHT
SURROUND
L
R
CENTER
SUBW PROGRESSIVE INTERLACE
3
1 Connect the Player’s Pr/Cr Pb/Cb Y (VIDEO OUT) jacks to
the corresponding Pr/Cr Pb/Cb Y VIDEO IN jacks on the
TV. Use component video cable (not supplied).
2 Connect the supplied red and white audio cables to the
Player’s red and white (right and left) AUDIO OUT jacks
and to the right/left AUDIO IN jacks on the TV. Match the
cable colors to the jack colors.
3 Set the PROGRESSIVE/INTERLACE switch to
INTERLACE.
4 Connect the power cords of the Player and the TV to the
power outlet.
Press STANDBY-ON on the front of the Player to turn on
the Player. The red Standby light will disappear.
5 Turn on the TV power and set the TV to the correct
Component Video In channel.
See your TV owner’s manual for
details. Or, change channels at the TV until you see the Player’s
blue screen saver on the TV screen.
• On the TV, the component video
in jacks may be labeled YUV or
Pr/Cr Pb/Cb Y and may be red,
blue, and green.
Helpful Hint