Philips 27PC4326-37 - Manual (Page 61)

DVD
1 2 3
4 5 6
7 8 9
0 +10
+100 CLEAR
REC MODE REC
PLAY H G
STOP
RETURN
MODE
SELECT
DISPLAY
CH. VOL.
MUTE
DISC SET-UP
MENU
SLOW PAUSE
TITLE
STANDBY-ON
OPEN/CLOSE
ENTER
PICTURE
/SLEEP
Track Search 6 1
• j/h and i/g do
not function when playback is
stopped.
• You cannot use i/g to
go from the last track on the
disc to the first track.
• Using j/h or i/g
during Dual Playback will only
affect MP3 files. If you want to
skip JPEG files during Dual
Playback, press s or B.
C
A
B
Helpful Hints
Track Search
There are three ways to search for a track. Refer to A-C below.
● Before you begin, press SELECT to put the
TV/VCR/DVD in DVD mode. The green DVD light will
appear on the front of the TV/VCR/DVD. Make sure a valid
disc is in the disc tray.
A
Using the Number Buttons
To select a single digit track number: press the number
directly. Playback of the selected track will start automatically.
To select 2 digit track number:
- If the disc contains more than 9 and less than 100 tracks
(total track number is 2 digit), press + 100/+10 button first.
Then enter the track number. For example if you want to
select track 26, press +
100/+10 first, then press 2 and 6.
- If the disc contains more than 99 tracks (total track num-
ber is 3 digit), press + 100/+10 button then press 0.Then
enter the track number. Or press + 100/+10 first, enter the
track number, then press ENTER at the last.
To select 3 digit track number: Press + 100/+10 first.
Then enter the track number.
If you enter a track number that is not available on the disc,
playback will not begin (or the current track will continue to play).
B
Using j/h and i/g
During playback, press i/g to skip the current
track and move to the next track.
Press j/h to return to the beginning of the
current track or to go to previous tracks.
(For JPEG Playback, you also can use
{ or B .)
C
Using MODE
1
During disc playback, press MODE repeatedly
until the Search menu appears in the information bar
at the top of the screen.
2
Press
▲ or ▼ repeatedly until
appears.
Within 1 minute, enter the desired track number
using the Number buttons.
To select a single digit track number: Press 0
first. (If the total track number is more than 9 and less
than 100, press 0 once. If the total track number is more
than 99, press 0 twice. ) Then enter the track number.
To select 2 digit track number:
- If the disc contains more than 9 and less than
100
tracks (total track number is 2 digit), enter the
track number directly.
- If the disc contains more than 99 tracks (total track
number is 3 digit), press 0 first.Then enter the
track number. Or enter the track number, then
press ENTER at the last.
To select 3 digit track number: Enter the track
number directly.
_/17 (SEARCH)
C
T3221UB_EN2 4/20/06 9:31 PM Page 61