beautypg.com

30 one-touch recording – Philips 27PC4326-37 User Manual

Page 30

background image

TV/VCR/DTV

1

2

3

4

5

6

7

8

9

0

+10

+100

CLEAR

REC MODE

REC

PLAY

H

G

STOP

RETURN

SELECT

CH.

VOL.

DISC

SET-UP

MENU

SLOW

PAUSE

TITLE

STANDBY-ON

OPEN/CLOSE

ENTER

PICTURE

/SLEEP

3

Press REC/OTR I on the
front of the TV/VCR/DVD.

30 One-Touch Recording

A One-Touch Recording (OTR) is an immediate timed
recording from 30 minutes to 8 hours long.

Before you begin ...

Turn on the TV/VCR/DVD.

Press SELECT to put the unit in TV/VCR mode.
The red VCR/TV light will appear on the front of the unit.

Insert a videotape with its erase prevention tab in place.
Details are on page 8.

1

Press the Number buttons or CH.

/to

select the channel you want to record.
Remember, if the TV/VCR/DVD is connected to a
Cable Box/Satellite Receiver, the TV/VCR/DVD must
be on channel 3, 4 or AUX.
Select the channel you want to record at the Cable
Box/Satellite Receiver. Details are on page 9.

2

Press REC MODE to select a tape recording
speed (SP or SLP).
Details are on page 29.

3

Press REC/OTR I on the front of the
TV/VCR/DVD repeatedly to select a recording
length. Recording will start immediately.
Each press of REC/OTR I will increase the recording
time by 30 minutes. The maximum recording length is
8 hours.

4

Press STOP C to stop a one-touch recording
before its designated end time.
Otherwise,
recording will stop at the time you designated. The
TV/VCR/DVD will turn off when the OTR ends.

OTR (2:30)

SP

• You cannot start an OTR with

the REC I button on the
remote control.

• To show the remaining

recording time, press DISPLAY.
OTR and the remaining
recording time will appear
briefly in the top left corner of
the screen.

• If the tape ends before the

recording’s end time, the
TV/VCR/DVD will stop
recording, eject the tape, and
turn itself off.

• An OTR will continue even if

you turn off the TV/VCR/DVD.
The flashing REC/OTR light
indicates the recording is still
in progress.

• To change the recording

length while an OTR is in
progress, press REC/OTR I
repeatedly.

• You cannot pause an OTR.
• If the preset time for a timer

recording comes up during an
OTR, the OTR has priority.
The timer recording will not
take place.

Helpful Hints

4

2

1

T3221UB_EN1 4/20/06 9:32 PM Page 30

This manual is related to the following products: