Philips 32PT9100D-37B - Manual (Page 20)

20
ACTIVE CONTROL OPTIONS
1
MENU button on the remote control
to display the onscreen menu.
2
Press CURSOR < or > to scroll through
the onscreen menu until you see Features
highlighted.
3
Press CURSOR > to display the Features
menu.
4
Press CURSOR < or > repeatedly until you
see Active Control highlighted.
5
Press CURSOR > or < to toggle the Active
Control to On and Off. Off Off
6
When finished, press the MENU button on the
remote control twice to exit the menu from the
TV screen.
>
>
< >
MENU
A
ctive control options adjusts the picture brightness according to the condition of the lighting in the room.
HOW TO USE THE PIP (PICTURE-IN-PICTURE) CONTROLS
Select PIP Channels:
1
Press CH+ or CH– on the remote control to CH– CH–
select all available channels in the
1
PIP window.
2
Press the Numeric buttons on the remote
control to select available channels on the main
screen.
3
Press A/D button to switch between Digital
and Analog channels.
3
NUMERIC
BUTTONS
A/D
Note : PIP feature can display one channel (an analog
channel) on the main screen while showing another
channel (a digital channel) in the PIP window or vice
versa. It cannot show both analog or digital pictures on
both main and PIP window at the same time.
Refer to the following ATSC PIP Table for all possible
combination.
Note : When the lighting in the room is dim, the brightness of the picture
will be decreased. When the lighting in the room is bright, the brightness
of the picture will be increased.
Main Window PIP Window
·
Digital (Cable / Off Air)
·
Analog (Cable)
·
CVI (Component Video)
·
Composite Video
·
S-Video
·
Analog
·
Digital (Cable / Off Air)
·
CVI (Component Video)
·
AV (Composit Video0
·
S-Video
·
HDMI
·
Cannot activate PIP
·
HD CVI
C
M
Y
CM
MY
CY
CMY
K
ATSC_pg20.pdf 2006-08-16 4:56:17 PM