Philips 32PT9100D-37B - Manual (Page 16)

16
SOUND MENU CONTROLS
1
Treble: Press CURSOR >
or < to adjust the treble
levels. The control will enhance
the high frequency sounds.
2
Bass: Press CURSOR CURSOR CURSOR > or
< to adjust the bass levels. The
control will enhance the low
frequency sounds.
3
Balance: Press CURSOR >
or < to adjust the level of
sound coming from the left and
3
right speakers.
4
AVL: (Auto Volume Leveler)
Press CURSOR CURSOR CURSOR > or < to
turn the control On or Off. Off Off
When turned On, AVL will
level out the sound being heard
when sudden changes in volume
occur during commercial breaks
or channel changes.
5
Incr. Surround: Incr. Surround Incr. Surround Press
CURSOR
CURSOR CURSOR > or < to select
between Dolby Virtual or
Stereo settings.
6
Alt Audio Program Alt Audio Program: Press
CURSOR
CURSOR CURSOR > or < or or to select
the appropriate language.
7
Digi Audio Level Digi Audio Level: Digi Audio Level Digi Audio Level Press
CURSOR
CURSOR CURSOR > or < to turn
the control On or Off.
Off Off When
turned Off, Digi Audio Level ff ff
will level out the sound being
heard when sudden changes
in volume occur during
commercial breaks or channel
changes.
8
Digi Audio Digi Audio Out: Out Out Press
CURSOR > or < to select the
audio system which the TV is
connected to.
1
Treble: Press CURSOR > or
< to adjust the treble levels.
The control will enhance the
high frequency sounds.
2
Bass: Press CURSOR > or <
to adjust the bass levels. The
control will enhance the low
frequency sounds.
3
Balance: Press CURSOR >
or < to adjust the level of
sound coming from the left and
3
right speakers.
4
AVL: (Auto Volume Leveler)
Press CURSOR CURSOR CURSOR > or
< to turn the control On
or Off. When turned Off Off On, AVL
will level out the sound being
heard when sudden changes
in volume occur during
commercial breaks or
channel changes.
5
Incr. Surround: Incr. Surround Incr. Surround Press
CURSOR > or < to select
between Dolby Virtual or
Stereo settings, or
select Spatial or Mono.
6
SAP: SAP SAP Press CURSOR >
or < to toggle this control to
On or Off. Secondary Audio
Off Off
Programming (SAP) is sent as a
third audio channel, a SAP signal
can be heard apart from the
current TV program sound.
Note: If SAP is not present
on a selected show, No SAP No SAP No SAP
will be displayed on the TV
screen.
7
Sound: Sound Sound Press CURSOR CURSOR CURSOR > or
< to select between Stereo
or Mono settings.
Note: If Stereo is not present
on a selected show and the
TV is in Stereo mode, the
sound coming from the TV
will remain in the monoaural
(Mono) mode.
Follow these steps for Digital Mode Follow these steps for Analog Mode
To switch between Digital and Analog channels,
use the A/D button on the Remote Control.
H
ELPFUL
H
INTS
>
>
< >
MENU
Digital Mode Analog Mode Analog Analog
T
o adjust your TV sound, use the Sound Menu Controls listed below.
T T
Your selection is stored as Personal.