Philips 32PT9100D-37B - Manual (Page 18)

18
HOW TO USE THE TIMER MENU CONTROLS
DTV
NUMERIC
BUTTONS
>
>
< >
MENU
Digital Mode Analog Mode Analog Analog
1
Press the MENU button on the remote
control to display the onscreen menu.
2
Press the CURSOR < or > button until
Features is highlighted.
3
Press the CURSOR > button to
display the Features menu.
4
Press the CURSOR > button to
display the Timer menu.
5
-
Press the CURSOR > button to
access the Timer menu.
6
Press the CURSOR < or >¸ until one
of the Timer controls (Time, Start Time,
Stop Time, Channel, Activate, or Display) is
highlighted.
7
Press the CURSOR > button to display
the menu for the selected item
Make adjustments to the selected items by
following the steps below.
Time: Enter the current time using the
NUMERIC buttons. Use the CURSOR
> or < to toggle the AM and PM setting.
Start Time: Use the NUMERIC buttons to
enter the time you want the TV to turn itself
On. Use the CURSOR > or < to toggle the
AM and PM setting.
Stop Time: Stop Time: Use the NUMERIC buttons to
enter the time you want the TV to turn itself
Off. Use the
Off Off CURSOR > or < to toggle the
AM and PM setting.
Channel: In Digital Mode, use CH + or
CH- to select DTV which is the last viewed
digital channel. In Analog Mode, use the
NUMERIC buttons or the CH + or CH-
buttons to enter the startup channel.
Activate: Set the timer to turn itself Off, Off Off
Once or Daily. Press the CURSOR > or <
to select Once, Daily, or Off.
Off Off
Display: Display: Press the CURSOR > or < to
toggle between On or Off. If Off Off On is selected,
the time will be displayed all the time when
the TV is on. When Off is selected, the time
Off Off
will only appear when the INFO button is
pressed.
NOTE : Display is not available in Digital Mode.
8
Press the MENU button on the remote
control three times to remove the onscreen
menu from the TV screen.
Y
our television comes with an onscreen clock. The TV can also be set to turn on or off at a specific time and tune
YY
to a specific channel when it powers itself on.
YY
In Digital Mode In Digital Mode : Before you turn off the : Before you turn off the
TV you have to switch to the desired digital
channel because the TV will wake up in the last
viewed digital channel.
In Analog Mode : You can specify which
channel to wake up to.
H
ELPFUL
H
INTS