Philips 32PT9100D-37B - Manual (Page 10)

AUTOMATIC PROGRAM
10
1
Complete the antenna
or cable signal connection
before activating
AUTO PROGRAM.
2
Press MENU on the remote
control to display the
onscreen menu.
3
Press CURSOR < or > to
scroll though the onscreen
menu until you see Install
highlighted.
4
Press CURSOR > to display
the Install menu features.
5
Press CURSOR < or
> to scroll through the
Install features until you see
Auto Program highlighted.
6
Press CURSOR > to start
the select antenna or cable
mode.
7
Autoscan will begin. This may
take 20 to 40 minutes
depending on the number of
channels available.
When
finished, press MENU twice
to exit the menu display from
the TV screen.
8
Press A/D to switch between
Digital and Analog channels to
view your programs.
Y
ou can program the TV to automatically set itself for local area (or Cable TV) channels. This makes it easy for you
YY
to select only the TV stations in your area when the CHANNEL (+), (–) buttons are pressed.
YY
1
Complete the antenna or
cable signal connection
before activating
AUTO PROGRAM.
2
Press MENU on the remote
control to display the
onscreen menu.
3
Press CURSOR < or > to
scroll though the onscreen
menu until you see Install
highlighted.
4
Press CURSOR > to
display the Install menu
features.
5
Press CURSOR < or >
to scroll through the Install
features until you see Auto
Program highlighted.
6
Press CURSOR > to select
antenna or cable mode.
7
When finished, press MENU
twice to exit the menu from
the TV screen.
8
Press A/D to switch
between Digital and
Analog channels to view your
programs.
Follow these steps for Digital Mode Follow these steps for Analog Mode
MENU
>
>
< >
A / D
Digital Mode Analog Mode
When CABLE is selected, channels 1-135 are
available in Digital Mode and Channels 1-125 are
available in Analog Mode.
When ANTENNA is selected, channels 2-69 are
available for both Digital and Analog Modes.
When you install in Digital mode, it will
install both Digital and Analog channels
H
ELPFUL
H
INTS