Glen Dimplex Home Appliances Ltd 100 - Manual (Page 9)

Programmer / Clock (if fitted)
Setting the minute minder
Press and release the function button.
The minute minder bell symbol will
appear and flash on the display. Use the
plus and minus buttons to set the
required alarm time. After setting, the
display will revert to show the time of
day and the bell symbol will stop flash-
ing. Pressing the function button will
display the minutes remaining. If the
time has counted down to the last
minue, the remaining seconds are
shown. The tone will sound at the end
of the time set. To cancel the tone,
press the function button.