Glen Dimplex Home Appliances Ltd 100 - Manual (Page 13)

Using Your Grill
Before you start grilling. . . .
Before you use the grill, make sure you have placed the
grill shelf in the position you need as once the grill is on
you may injure yourself if you try to move the shelf.
Switching on the grill
●
Turn the selector control knob to the full on position,
and press the ignition switch (if fitted).
With FSD: Hold the control knob in for 15 seconds.
●
If the grill is not lit after 15 seconds, switch off the grill
leave the door open and leave for at least one minute
before attempting to re-light.
Should the burner be extinguished while in use, switch
off the grill and again leave for one minute before
attempting to re light.
●
To turn off, turn the control knob to the ‘●‘ / off
position.
●
The cooling fan will come on during use, and may
continue to run for some time afterwards.
The grill pan
This appliance comes with a grill pan, grill pan handle and
a trivet.
The handle of the grill pan is detachable to allow you to
remove it while the pan is in use, this stops it from
getting hot.
To attach the handle:
Place the handle over the narrow edge of the grill pan
and slide to the centre as shown in the diagrams.
Auto re-ignition (if applicable)
Should the grill door be closed accidentally while the grill
is in use, the gas supply will cut out. The grill will re-
ignite upon opening the door. This helps to ensure your
safety and is not to be used as a method of turning off
the grill.
Shelf & Grid adjustments
Speed of grilling can be adjusted by changing the shelf
position or the turning the grill pan grid.
●
High: For thin foods and toasting.
●
Low: For thicker meat pieces.
Aluminium Foil
Never cover the grill pan or grill trivet with foil, or allow fat
to build up in the grill pan, as this creates a fire hazard.
Important:
Do not leave the grill
unattended while it is in
use.
Please note: the grill
pan handle is designed
for sliding the grill pan
into and out of the grill
cavity. It is not to be
used for lifted the pan.
i
i
For best results:
Pre-heat the grill for
about 3 minutes.
i
Your grill may have an
FSD fitted. If it does,
you will need to hold
the control in for 15
seconds to allow the
grill to ignite.
If your grill does not
have an FSD, you will
not need to hold the
control knob in.
i
CAUTION: Accessible
parts may be hot
when the grill in use.
Young children
should be kept away.
i