Brother HL 4150CDN - Manual (Page 85)

Control Panel
79
3
Color Correction
3
Submenu Menu Selections Options Descriptions
Frequency Normal
*/Low/Off Sets the interval time you want to
carry out the auto color correction
ColorCalibration Calibrate
Carries out calibration to revise the
colors. (See Color Calibration
on page 82.)
Reset
Sets the calibration parameters back
to the default settings. (See Color
Calibration on page 82.)
Auto Regist. Registration
Adjusts the print position of each
color automatically. (See Auto
Registration on page 82.)
Manual Regist. Print Chart
Prints the chart to manually check
the registration of the colors. (See
Manual Registration on page 83.)
Set Registration 1 Magenta Left
2 Cyan Left
3 Yellow Left
4 Magenta Center
5 Cyan Center
6 Yellow Center
7 Magenta Right
8 Cyan Right
9 Yellow Right
Enter the correction value on the
chart you printed from the
Print Chart
. (See Manual
Registration on page 83.)
The factory settings are shown in Bold with an asterisk.