Bowers & Wilkins CCM7 - Manual (Page 7)

7
4.8 The baffle can now be lifted up into the back box.
Ensure that the connector on the baffle is oriented
correctly with the connector inside the back box.
The baffle is held in the back box by four push-
lock fasteners. push-lock fasteners are secured by
pushing the head inwards – either with a thumb or a
screwdriver. As they secure, the fasteners will click.
With one person holding the baffle in place, a second
person can push and secure the four push-lock
fasteners. The fasteners will click three times. The
baffle will then be secure in the back box. The diagram
above illustrates inserting the baffle and securing the
push-lock fasteners.
Note: Push-lock fasteners are unsecured by turning
them 45° using a screwdriver.
4.9 The grille can now be fitted to the baffle. It is held in
place magnetically so simply needs to be aligned with
the groove in the back box flange where it will click into
place. The diagram above illustrates fitting the grille.
The CCM7 Series speaker is now installed and ready
for use.
= 3x