BlueAnt Supertooth 2 Bluetooth portable handsfree - Manual (Page 54)

the voice dialing.
2.
Beep will then be heard on the Supertooth prompting the
user to say the name of the person to call.
3. Say the name. The name will be played back to you. The phone will then place the
call automatically. In case the cell phone does not recognize the name spoken, the
steps above may be repeated.
4. Press the Pick-Up/Hang-Up Button to terminate the call.
Redialing
Make a long press on the Pick-Up/Hang-Up Button to redial the last number.
e. AUDIO
TRANSFER
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically transfer
the audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then press shortly the
Pick-Up/Hang-Up Button. The audio will be transferred from the phone to the kit.”
f. REJECTING
A CALL
Press the Reject Button to reject an incoming call.
g. RECONNECTING
SUPERTOOTH
After coming into range or turning SuperTooth back on, Press the Pick-Up/Hang-Up key on the
SuperTooth once to Reconnect.
h.
SETTING THE VOLUME
Setting the volume can be done using the Volume Control.
1.
Turn it clockwise to increase the volume.
2. Decrease the volume by turning it counter-clockwise.
Note: If the volume set is too high, it can cause feedback (whistling sound), echo or
background noise during calls on some cell phones.
i.
ACTIVATING THE VOICE DIALING
Use your phone when recording for the voice dialing. Before voice dialing, you must first turn
on the Voice Dial function and record your voice. To turn voice dial on:
1. Go to the Menu by pressing key. Scroll to Contacts List, Select.
2. On the Contacts List, choose Settings, Select.
3. Choose Voice Dial, Select. Choose On and press Ok.
4. Continue pressing to exit.
j.
RECORDING FOR VOICE DIALING
1. Go to Menu by pressing key. Scroll to Contacts List, Select.
2. On the Contacts List, scroll down to Voice Dial, Select.
3. Press Menu. Choose Add, Select.
4.
On the contact names listed, choose the name which you want to make a voice dial.
5. After choosing a contact, press again center button of key. Choose Recall, Select.
“Please Record Your Voice!”, press Ok.
54