Nokia 9500 / 9300 – BlueAnt Supertooth 2 Bluetooth portable handsfree User Manual
Page 39
NOKIA 9500 / 9300
Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the
support section of the relevant site to check you have the latest version. You may need to
register your device to download updates.
For Nokia 9500 go
a.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your phone to establish a Bluetooth connection
between your Pocket PC device and other Bluetooth devices.
1. Select Desk…Tools…Control Panel…Connections…Bluetooth…
2. Select the Settings page…Select Bluetooth Active…Select Yes
b.
PAIRING TO THE CELLULAR PHONE (not possible while charging)
1.
Bring your phone to within about 20 cm from the Supertooth.
2.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
3. Simultaneously
press
the
Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree
Pairing Mode.
4. Select
Desk…Tools…Control Panel…Connections…Bluetooth…
5. Select
Paired Devices…Press New… then Start to search for devices
Your phone now searches for Bluetooth devices and will display them in the list.
6.
Scroll to the name of the device, Supertooth, and then press Pair.
7.
Enter “0000” as the Passcode and then press OK.
8.
In Paired Devices select Supertooth and Press Edit.
9.
Move to the Device Authorized field and select Yes.
10. In Paired Devices select Supertooth…Press Edit…Press Connect.
The Supertooth is paired with your Nokia 9500. An enabled Bluetooth icon will be seen on
screen indicating that the Supertooth is linked.
c.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, two dissimilar ring tones will be heard from
the phone and then from the Supertooth.
1.
When answering is done on the Supertooth (that is, pressing Answer once), audio
will be heard on it.
2.
When answering is done on the phone, ongoing call will be heard on the phone
(not on the Supertooth). But if you wish to hear and transfer the audio to the
Supertooth, just press the Answer button once on the Supertooth.
3.
To terminate the call, press down the Pick-Up/Hang-Up Button.
39