BlueAnt Supertooth 2 Bluetooth portable handsfree - Manual (Page 21)

d. MAKING A CALL with the Supertooth on
Normal dialing
With your Device you can make a call using different methods. Please refer to your PC
Phone’s User Guide.
The most direct method is by using the Phone keypad.
1. Press button to bring up the dialer screen.
2.
Tap the number on the keypad, and then tap Talk key on your phone.
Note: Audio will be heard directly on the Supertooth. At times, for first time dialing, audio
will be heard on the phone and not immediately on the Supertooth. If this is the case you
have to press once on the Pick-Up/Hang-Up Button to transfer the audio to the Kit.
3.
To terminate the call, press down the Pick-Up/Hang-Up Button.
Redial
Calls the last number previously dialed from the phone.
Redialing must be done while in the Today screen.
1. Press and hold the Pick-Up/Hang-Up button on the Supertooth for 3 seconds.
e.
AUDIO TRANSFER DURING A CALL
1. Audio Transfer back to the Phone can be done by accessing the phone’s
Bluetooth Headset icon at the top of the screen.
2. Audio Transfer to the Supertooth is done by…
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically
transfer the audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button. The audio will be transferred
from the phone to the kit.”
f. REJECTING A CALL
Rejecting a call can be done by selecting IGNORE on the phone or pressing the
Reject button on the Supertooth.
g. SETTING THE VOLUME
Setting the volume can be done using the Volume Control.
1.
Turn it clockwise to increase the volume.
2. Decrease the volume by turning it counter-clockwise.
3. Volume can also be adjusted using the phone’s volume control.
h.
RECONNECTING
The latest Rom from I-mate does not support auto reconnect. To reconnect after turning the
Supertooth back on or coming into range…
1.
Press the Pick-Up/Hang-Up button on the supertooth. Wait for the connection to happen.
Then press Pick-Up/Hang-Up . OR
2. Go to the Bluetooth Manager Tap and Hold the Supertooth, select connect.
Note: If the volume is too high, it can cause feedback (whistling sound), echo or background
noise during calls on some cell phones.
21