BlueAnt Supertooth 2 Bluetooth portable handsfree - Manual (Page 13)

Redialing (Handsfree profile only)
Make a long press on the Pick-Up/Hang-Up Button. Audio will be on the
Supertooth II.
Audio Transfer
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically
transfer the audio from the kit to the phone.
Phone to Kit
For Nokia Phones:
Flip up the Swivel Arm from 0º to 55º or 210º positions. This will automatically
transfer the audio from phone to kit.
For Other Phone Models:
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
shortly press the Pick-Up/Hang-Up Button. The audio will be transferred
from the phone to the kit.
Note: for some phones in Headset mode, Kit to Phone transfer must be done from
the phones menu.
Rejecting a call (Handsfree Profile only)
Press Reject Button to reject an incoming call.
Note : For Headset profile, Call Reject must be done from the phone.
Setting the Volume of the Supertooth II
Set the volume using the Volume Control.
1. Turn it clockwise to increase the volume.
2. Turn it counterclockwise to decrease.
Note: If the volume knob on the Supertooth II is too high, it can cause feedback
(Whistling sound), echo, or background noise during calls on some cell
phones.
Setting the Volume of the Mobile Phone
Volume levels on most phones are set automatically to optimum levels when
you connect your Supertooth II.
13