BIXOLON 352plusA - Manual (Page 21)

Rev. 2.01 - 21 -
SRP-350/352plusA&C
3-3-5 Printable Area
a
d c e
Figure 3-4 Printable Area
1) 180dpi
Item Description Remark
a 80±0.5mm(3.15 ±0.0197)
b 0.141 (0.0056 )
c 72±0.2mm(2.83 ±0.0079)
d 2.75mm~4.25mm
e 2.75mm~4.25mm
Dots 512
Font 9X24 56 Character
Font 12X24 42 Character
* ‘d’ & ‘e’ position can be shifted while printing according to the paper position.
2) 203dpi
Item Description Remark
a 80±0.5mm(3.15 ±0.0197)
b 0.125 (0.0049 )
c 72mm±0.2mm (2.83±0.0079)
d 2.75mm~4.25mm
e 2.75mm~4.25mm
Dots 576
Font 9X24 64 Character
Font 12X24 48 Character
* ‘d’ & ‘e’ position can be shifted while printing according to the paper position.
3-3-6 TPH (Thermal Printer Head) Specification
1) 180dpi
Item Description Remark
Heat Element Structure 2 Heaters / Dot
Number of Heat Element 512 Dots
Heat Element Pitch 0.141mm/dot, 7.09Dot/mm (180DPI)
Print Width 72±0.2mm
Average Resistance 800Ω ± 3%
Thermister 1) Resistance R25 : 30kΩ ± 5% (At 25℃)
2) B Value : 3950K ± 2%
3) Temperature : - 40℃ ~ +125℃
Table 3-7 TPH Specification
b