beautypg.com

Bloomfield 9102A User Manual

Page 12

background image

10

CLEANING INSTRUCTIONS (continued)

PROCEDURE: Clean Satellite


PRECAUTIONS: Drain Satellite before Cleaning

FREQUENCY: Twice Weekly

TOOLS: Sight Glass Brush, Sanitizer
Soft Clean Cloth, Bucket


1. Remove and drain satellite.

2. Place 1 packet of Sanitizer into 2-1/2 gallons of warm tap
water. Pour approximately 1 gallon of sanitizer solution into
each satellite. Allow to stand for 2 minutes.

3.

Remove the shield cap (large vent) on top of the sight glass.


NOTE: It is not necessary to remove the sight glass unless it
is broken and replacement is required.

4. Run the sight glass brush up and down through the sight
glass at least 10 times.

5. Reinstall and tighten the shield cap.

6. Drain sanitizer solution from satellite into the bucket.

7.

Disassemble faucet. Brush clean with sanitizer solution.

Reassemble faucet.

8. Install satellite on brewer.

9. Rinse satellites: With an empty brew chamber in place, press
the BREW key and run 1 full cycle into satellite.

10. Drain water from satellites.


Procedure is complete

CAUTION:
Burn Hazard

Brewing and serving
temperatures of coffee are
extremely hot.
Hot coffee will cause
serious skin burns.

IMPORTANT:

DO NOT use steel wool, sharp
objects, or caustic, abrasive or
chlorinated cleansers to clean
the satellites.

663 76061 Ow

ners

M

a

n

ual for

910

2A
S

ingle Satellite Bre

w

er

This manual is related to the following products: