Bowers & Wilkins 600 Series2 - Manual (Page 19)

DM ™ 605 S2
Kevlar is a registered trademark of DuPont.
B&W Loudspeakers Ltd reserves the right to amend details of the specification without notice in line with technical developments.
Copyright © B&W Loudspeakers Ltd. Printed in England.
B&W Loudspeakers Ltd, Meadow Road, Worthing, BN11 2RX, England. Tel: +44 (0) 1903 524801 Fax: +44 (0) 1903 524725
http://www.bwspeakers.com
II 08370 Issue 2
Description
Drive units
Frequency range
Frequency response
Dispersion
Sensitivity
Harmonic distortion
Nominal impedance
Crossover frequencies
Passive power handling
Max. recommended
speaker cable impedance
Amplifier
Dimensions
Net weight
3-way vented-box system with active bass
2x 180mm (7in) paper/Kevlar ® cone bass
1x 180mm (7in) woven Kevlar ® cone midrange
1x 26mm (1in) metal cone high-frequency
-6dB at 23Hz (adjustable) and 30kHz
25Hz (adjustable) – 20kHz ±3dB on reference axis
Within 2dB of response on reference axis
Horizontal: over 40° arc
Vertical: over 10° arc
91dB spl (2.83V, 1m)
2nd & 3rd harmonics
<1% 42Hz – 20kHz (90dB spl, 1m)
8 Ω (minimum 3 Ω )
230Hz, 4kHz
25W-200W continuous into 8 Ω on unclipped programme
0.1 Ω
Power output: 130W continuous
Input impedance: 100k Ω
Signal/noise: 91dB
Functions: Bass level
Bass equalisation
LFE phase 0°/180°
Auto-sensing standby/on
Inputs: Speaker level (binding posts)
LFE (RCA Phono)
Outputs: LFE link to 2nd unit (RCA Phono)
Height: 996mm (39.2 in)
Width: 236mm (9.3 in)
Depth: 440mm (17.3 in)
31kg (68.2 lb)