Brother BCL-D20 - Manual (Page 9)

General Information
3
1
Installing the battery
1
a
Insert the connector (1) of the battery (2)
in the direction shown below.
b
Place the battery in the position shown.
c
Install the battery cover by sliding it onto
the back of the handset.
Note
Be careful that you do not catch the
battery connector cord.
d
Charge the battery by leaving the
cordless handset in the cradle for at
least 12 hours before you use it.
(See Charging the battery on page 27.)
You can continue to set up the handset
during this time.
1
2