Brother BCL-D20 - Manual (Page 27)

Menu and Features
21
3
General setup
3
Ring Volume
3
You can choose a range of ring volume
levels, from High to Off.
a
Press d or c to adjust the volume
level.
This setting will stay until you change it
again.
Note
• If you choose Off, will appear on the
LCD.
• Even if you choose Off, the cordless
handset will ring in the lowest volume level
when you receive a transferred call.
Beeper Volume
3
When the beeper is on, the cordless handset
will beep when you press a key.
a
Press Menu/OK.
b
Press a or b to choose HS Settings.
Press Menu/OK.
c
Press a or b to choose
Setup Ringer
.
Press Menu/OK.
d
Press a or b to choose Beeper.
Press Menu/OK.
e
Press a or b to choose On or Off.
Press Menu/OK.
f
Press .
Speaker Volume
3
You can choose a range of speaker volume
levels, from High to Low.
a
Press .
b
Press d or c .
This setting will stay until you change it
again.
c
Press .
Handset Volume
3
You can adjust the cordless handset volume
any time you are talking on the telephone.
a
Press d or c .
This setting will stay until you change it
again.
Ringer Pattern
3
You can choose a ring pattern from five signal
(regular ring patterns) or two types of
melodies.
a
Press Menu/OK.
b
Press a or b to choose HS Settings.
Press Menu/OK.
c
Press a or b to choose
Setup Ringer
.
Press Menu/OK.
d
Press a or b to choose
Ringer Pattern
.
Press Menu/OK.
e
Press a or b to choose Signal 1,
Signal 2
, Signal 3, Signal 4,
Signal 5
, Melody 1 or Melody 2.
Press Menu/OK.
f
Press .