Brother BCL-D20 - Manual (Page 8)

Chapter 1
2
Introduction
1
The cordless handset offers several functions
that can be used to enhance the calling
features of your Brother machine.
„ Redial:
Allows you to choose one of the last 10
numbers dialled for redialling. You can
also store this number in the Phonebook.
„ Store numbers:
You can store up to 100 names with each
having a number available in the
Phonebook.
„ Transfer:
Transfer calls between the cordless
handset and the machine (base unit). If
you have additional optional cordless
handsets, you can also transfer a call to
another cordless handset.
„ Intercom:
Use the intercom feature to make internal
calls between the cordless handset and
the machine (base unit). If you have
additional optional cordless handsets, you
can also make an intercom call to another
cordless handset.
„ Three-way conference call:
Three-way conference call allows two
users to speak with a third party from the
machine (base unit) and the cordless
handset at the same time.
„ Caller ID:
If you have a Caller ID subscriber service
from your telephone company the
incoming caller will be identified on the
LCD display of the cordless handset. You
can also store this number as a
Phonebook. This feature may not be
available in some countries.
Initial Setup
1
Your Brother machine can support up to 3
optional cordless handsets for a total of 4
cordless handsets. If you have purchased an
optional cordless handset please follow the
setup steps instructions below. For the
cordless handset that was included with your
machine please follow the setup steps
instructions in the Quick Setup Guide.
Connecting the battery
charger cradle power cord
1
a
Plug the connector into the socket (1)
and then hook the cable around its
retaining clip (2) as shown in the
diagram.
b
Plug the AC adapter into the electrical
socket.
1 2
(Example for U.K.)