Belkin F5D5230-4 - Manual (Page 27)

Step 4
25
3. Click "MAC Cloning/Entry" on the left-hand side of the screen. The
following screen will appear.
4. If your ISP assigned you a host name, enter the host name here. If
not, leave this field blank.
If your ISP binds the connection to a MAC address, you will need the
Router to copy that MAC address. If your ISP does bind your MAC
address, or you are not sure, follow this step.
5. Click "Clone MAC Address". This will clone (copy) the MAC
address of the first PC connected to the Router. This will also
ensure that the ISP, if it binds your connection to that MAC
address, that it will remain active. Click "Enter" to save the settings
6. Your Router is now set up and you will be able to access the
Internet from any PC on your network.