Belkin F5D5230-4 - Manual (Page 21)

Step 3
19
4. In the "Computer Name" field type a name for the computer such
as "Computer2". Remember, the name must be different from the
other computers on the network.
5. The workgroup name should be filled in with the name you
entered on the previous computer. Do not change this setting.
6. Type in a description such as "Windows 98". This can be
anything you want and does not have to be different or the
same as any other computer on the network. You may also
leave this field blank.
3. Windows will now prompt you to insert the newly created client
setup disk into the PC’s floppy drive. Insert the disk you labeled
"Belkin Networking" into the floppy drive and click OK. The
following screen will appear: