Belkin F5D5230-4 - Manual (Page 11)

Step 1
IMPORTANT:
IF YOU HAVE A CABLE OR DSL MODEM CONNECTED TO A PC
AND ARE NOW ADDING THE ROUTER TO YOUR NETWORK,
FOLLOW THESE STEPS TO OBTAIN INFORMATION YOU WILL
NEED LATER. If you are not connecting the Router to an existing
Cable or DSL modem, skip to the next section called "Connecting the
Belkin 4-Port Cable/DSL Gateway Router".
1. Turn on your computer and connect to the Internet through your
Cable or DSL Modem.
2. In Windows 95, 98, and Millennium Edition, Click "Start" then
click on "Run".
3. In the Run dialog box,
type "winipcfg" then
click "OK".
4. The IP Configuration
window will appear.
5. In the drop-down
menu, select your
current Ethernet
adapter by clicking
once on the down-
facing arrow and
highlighting your
adapter’s name by
clicking once on it.
6. The IP configuration
window will appear.
Click on "More Info".
9