Belkin F5D5230-4 - Manual (Page 25)

Step 4
23
Accessing the Web-Based Setup Utility
1. Using the computer that was originally connected directly to the
Cable/DSL modem, launch your browser. Note: You can access the
setup utility from any computer on the network, however, use the
original computer for this procedure at this time.
2. In the address bar, type the following address: 192.168.2.1.
3. The Router login screen will appear.
If this is the first time you are accessing the Belkin 4-Port
Cable/DSL Gateway Router, enter "Admin" in the User Name
field then click "OK".
4. The Router’s initial setup will appear.